Makita DLX2412TJ 18V LXT Brushless Combi Drill & Impact Driver With 2x 5Ah Batteries

Makita DLX2412TJ 18V LXT Brushless Combi Drill

Introduction

The Combi Drill DHP486 Large-capacity drilling with 152mm hole saw and 50mm auger
bit capacity Compact overall length of only 178mm for use in tight work situations
High-performance Brushless Motor has a 130Nm maximum torque. incredibly robust aluminum
gear housing Mechanical a two-speed transmission with all-metal gears rotating either
forward or backward Bit installation/removal is simple with a single-sleeve keyless
chuck and only requires one hand. powered brake trigger-controlled variable speed
control For drill-driver applications, the best possible ergonomic handle Belt clip
XPT – Extreme Protection Technology with LED task light.

DTD154

For the best performance in difficult circumstances, DTD154 Impact Driver eXtreme
Protection Technology (XPT) provides maximum protection against dust, debris, and
liquids. Fasteners are not overtightened thanks to the 3 step impact power selection
and TEK mode. Having an extremely small overall length of only 117mm Easy bit installation
and removal using a single touch sliding chuck TEK mode (T-mode) lowers impact power
during fastener seating’s final phases. Electronic selection of three impact powers
(Hard, Medium, and Soft) High power to weight and size ratio brushless DC motor
Brushless DC motors are perfect for longer usage in manufacturing and industrial
applications because they produce less heat accumulation. For improved performance,
battery cycle life, and total battery life, the battery protection system offers
over-discharge, temperature, and current protection.

Specification

DHP486 Combi Drill
Battery Capacity Indicator: No
Battery Compatibility: 18v
Lithium-Ion (LXT) Rotation: Forward / Reverse
Variable Speed Control Trigger: Yes
No Load Speed (RPM) High: 0-2100
Drill Capacity: Concrete (mm): 16
Voltage: 18v
Soft Application Max Torque (Nm): 65
Hard Application Max Torque (Nm): 130
Torque Settings: 21 +
Drill Brake Type: Electric
No. of Gears: 2
LED Job Light: Yes / Twin / Pre-glow / After-glow

Drill Capacity: Metal (mm): 13
Drill Capacity: Wood (mm): 76
Impact Rate (BPM) High: 0-31500
Impact Rate (BPM) Med: N/A
Impact Rate (BPM) Low: 0-8250
Overall Length (mm): 178
Net Weight (Approx. Kg) with 1.5/2Ah Batt: 2.3
Net Weight (Approx. Kg) with 3/4/5Ah Batt: 2.7
Brushless Motor: YesNo Load Speed (RPM) Med: N/A
No Load Speed (RPM) Low: 0-550
Chuck Type: 3-Jaw / Single Sleeve Keyless / All Metal
Chuck Capacity (mm): 13
Screw Capacity: Machine Screw (mm): 6
Screw Capacity: Wood Screw (mm): 10 x 90

DTD154 Impact Driver

Machine Screw Capacity: M4-M8
Standard Bolt Capacity: M5-M16
High Tensile Bolt Capacity: M5-M14
Coarse Thread Length Capacity (mm): 22-125
Max. Impacts Per Minute (ipm): H: 0-3800 / M: 0-2600 / L: 0-1100
Driving Shank: 1/4″ Hex Overall Length (mm): 117

Variable Speed Control Trigger: Yes / + 3-Stage Impact Power Selection
No Load Speed (RPM): H: 0-3600 / M: 0-2100 / S: 0-1100
Net Weight (Kg with 1.5/2Ah Battery): 1.2
Net Weight (Kg with 3/4/5Ah Battery): 1.4
Brushless Motor: Yes

Voltage: 18v Max Torque (Nm): 175
Brake Type: Electric
LED Job Light: Yes / Twin / Pre-glow / After-glow
Battery Capacity Indicator: No
Battery Compatibility: 18v Lithium-Ion (LXT)
Rotation: Forward & Reverse

Hope this topic “Makita DLX2412TJ 18V LXT Brushless Combi Drill“

READ MORE on Here are a few typical reasons why generators don’t generate electricity

READ MORE on What are the importance of buying a solar power generators? 

Read More about List of generator with remote start

READ MORE on How Electricity Is Produced by Generators 

READ MORE on Hikvision CCTV cameras Versus Bosch CCTV cameras 

ShopBy Team

See all author post